Color of delivered Product will Vary!! I want to insure each individual understands what they will be getting, so please read everything carefully and ask any questions you may have. Assembly Skill: (Beginner) Surface Preparation and Painting Skill: (Advanced) Length (Nose to Nozzle): 18" Largest Diameter: 2.3" Altitude and Speed with D12: 500ft @ 125mph Motor: D12 or Motors with the same Diameter as the D12 MADE AND DESIGNED IN THE USA BY TECH-COM INDUSTRIES Color of delivered Product will Vary!! This is a full scale replica of the M9 Bazooka M6A3 that first saw widespread use during World War II. Minor changes were made to allow for a launch rod. It was 3D printed from quality filament and thus very strong. It takes my printer as long as 20hours to make each of these so I do not know how many I will produce. Color of delivered Product will Vary!! There is no rocket recovery system (Parachute) included with this auction. It will be the buyers responsibility to install an appropriate parachute to safely recover this rocket. I did include loops on the inside of the nosecone for attaching your parachute and bungee system. **You must install a recovery system to safely fly this rocket since it weighs almost 1lb and will travel faster than 100mph.** **All model rocketry codes must be adhered to when launching rocket. This rocket must be launched vertically and from a safe distance. Trying to launch it from a Bazooka tube would result in severe burns, as well as possible legal violations** If you do not plan on launching this rocket it will make a perfect display piece or movie prop once painted and accented. It will be the buyers responsibility for preparing the surface for painting and insuring a quality product is produced. The surface will need to be smoothed by sanding or using an additive or thick paint. While the rocket assembly is (beginner level), the surface preparation and painting skill required to produce a realistic facsimile of the M9 Bazooka M6A3 would be (advanced level).